About Us Capabilities Services Products News Contact Us

September 18, 2007
ENrG Inc. Awarded NYSERDA Contract for Development of Components for Clean Power Generation
BUFFALO, NY
– ENrG Inc., a high technology firm specializing in the development and manufacture of ceramic components for clean energy, has been awarded a $250,000 contract by the New York State Energy and Development Authority (NYSERDA). Under the contract, ENrG Inc. will develop a critical ceramic component for removing carbon dioxide from exhaust gases created by coal-burning power plants. The award is in support of a $4.7 million Department of Energy contract awarded to Praxair, Inc. to develop a system for removing carbon dioxide emissions at such plants.
Trade Press Release

August 25, 2007
ENrG Inc. featured in Buffalo News article by Fred O. Williams entitled, “ENrG Inc. awarded state grant to work on clean coal technology”.

June 18-19, 2007
ASME Fifth International Fuel Cell Science, Engineering & Technology Conference

June 18–20, 2007 Brooklyn, N.Y.
Kathy Olenick of ENrG Inc. presented the paper, “Manufacturability of Electrolyte Supported Multi-cell Device SOFC Technology”

June 15, 2007
ENrG Inc. named #11 in Buffalo Business First’s Fast track 50 List, an annual list of Buffalo-Niagara’s fastest growing companies.

April 4, 2007
ENrG Inc. Receives NYSERDA Contract for Bi-Electrode Supported
Solid Oxide Fuel Cell System
High-Efficiency, Alternative Energy Technology Seen as Significant in Meeting Immediate Military Needs And Further Development for Commercial Applications
 BUFFALO, NY – ENrG Inc., a high technology firm specializing in the design, development and fabrication of critical ceramic components for clean energy systems, announces that the New York State Energy Research and Development Authority (NYSERDA) has awarded the firm up to $500,000 on a $1.4M contract to further advance the development of a bi-electrode supported Solid Oxide Fuel Cell (SOFC) system. Technology for this high power, compact energy source was originally developed by the NASA Glenn Research Center (GRC) in Cleveland, Ohio, and offers the potential of a five-fold improvement in power performance per weight over current SOFC approaches. It also features increased reliability of the fuel cell stack, the electrochemical power-generating unit that is central to the system. ENrG Inc. and NASA GRC will work with Battelle and Ultralife Batteries, Inc. on the commercialization of SOFC based battery charger systems for the military.
Trade Press Release


November 8, 2006
ENrG Inc. receives $500,000 NYSERDA contract for the development of advanced solid oxide fuel cell insulation
ENrG Inc. has developed unique technology that will enhance the insulation package for SOFC power units, enabling SOFC system integrators to further reduce their systems' mass and size, which is important for many stationary and mobile power applications. In total, this project will be a $1.3 million effort led by ENrG Inc.
(Buffalo , NY ), with testing support from Delphi Corporation (based in Troy , MI , with operations in Rochester , NY ).

Thick Film Printing Facility
Ceramic Coating Facility

July 13, 2006
WNY firm is clean for green.
ENrG Inc. opens a new 4,300 ft 2 Ceramic Coating Facility in Tonawanda , NY





ENrG Exhibit
ENrG Booth

June 26, 2006
ENrG Inc. at the NewJobsNY: Alternative
Energy Conference

ENrG Inc. participated in the NewJobsNY: Alternative Energy Conference sponsored by Senator Hillary Clinton. The event, held in Rochester, NY, focused on companies across New York State that are developing alternative energy products and academic institutions that are integrating research and development to develop the cleantech products of tomorrow.

June 19-20, 2006
Sixth Annual SmartStart Venture ForumSM

John Olenick , President of ENrG Inc. presented at the sixth annual SmartStart Venture Forum SM held in Albany , NY . The event showcased the best and brightest emerging technology companies and business innovators from across New York State.

May 16, 2006
New England Chapter's 33rd Annual Symposium and Exhibition

ENrG Inc. personnel presented two papers at the International Microelectronics and Packaging Society's (IMAPS) New England Chapter's 33rd Annual Symposium and Exhibition.

“Zirconia Powder for Fuel Cell Applications”, Dr. Viswanathan Venkateswaran

Work for this paper was co-funded by NYSERDA.

“In-Situ Seal Integrity Sensing for Solid Oxide Fuel Cells”, Tim Curry. ENrG Inc. was teamed with Johns Hopkins University Applied Physics Lab for this seal development effort.

April 2006
ENrG Inc. joins Ohio Fuel Cell Coalition

Welcome to ENrG Inc., a Buffalo, NY-based company involved in the manufacture of "Ceramics Technologies for Energy Applications".  ENrG specializes in ceramic process technologies for fabrication of setters, liners, tapes and membranes and provides contract manufacturing for tape casting and planar SOFC cells.


February 2006
Jim Newkirk joined ENrG Inc. as the Business Development

Jim Newkirk joined ENrG Inc. as the Business Development Manager.

February 10, 2006,
Tough Cuts, Small Cell

ENrG Inc. was featured in a Business First of Buffalo article titled “Tough cuts, small cell” by Annie Deck-Miller.

January 2006
International Microelectronics and Packaging Society (IMAPS) Fuel Cell Advanced Technology Workshop

ENrG papers “In-Situ Seal Integrity Sensing for Solid Oxide Fuel Cells” and “Zirconia Powder for Fuel Cell Applications”, were presented at the first IMAPS workshop dedicated to fuel cells. Work for the zirconia powder paper was co-funded by NYSERDA. The seal development effort was teamed with Johns Hopkins Applied Physics Lab.
September 28, 2004
ENrG Inc. and Corning Incorporated
Corning Incorporated and ENrG Inc. receive $8 million award from the National Institute of Standards and Technology for the development of solid oxide fuel cell technology.
August 27, 2004
Business First Article
Business First of Buffalo's article “Injection of funds fuels ceramics development” by Joe Iannarelli discusses how ENrG Inc. has received funding, gives a description of the funding sources and planned expansion of ENrG's facilities .
June 24, 2004
Governor George E. Pataki Announcement

Governor George E. Pataki announced more than $15 million to support 52 distributed generation and combined heat and power projects throughout the State, an increase from last years funding. These projects are designed to increase the availability of efficient generation, and support the development of advanced technologies for use in combined heat and power applications. ENrG Inc. is listed as one of the award winners for the new product development category.

February 2004
Tim Curry Trained in Fluent's CFD Software

ENrG Inc.'s Design and Test Manager, Tim Curry, completed a one-week comprehensive training course in the use of Fluent's CFD (Computational Fluid Dynamics) software. Training was conducted at Fluent's training center located in Lebanon , NH . This training provides the tools necessary for the application of Fluent's CFD software into ENrG's design and analysis challenges.

February 2004
ENrG Inc. has Relocated!

ENrG Inc. has moved their operations from Alden , NY to the Buffalo Free Trade Complex and the River Rock Industrial Incubator in Buffalo , NY . The move and upgrade of ENrG operations occurred through coordinated efforts with the Buffalo Economic Renaissance Corporation (BERC) and Buffalo Niagara Enterprise (BNE). The new facility consists of 4,500 sq. ft. of office and laboratory space, with an additional 1,400 sq. ft. of class 100,000 cleanroom for component manufacturing.

February 2, 2004
Buffalo, NY Mayor Masiello Visits ENrG Inc.

Mayor Anthony Masiello visited ENrG Inc. headquarters and welcomed the ENrG Inc. team to the City of Buffalo . During his visit, the Mayor toured the facility and made time to share lunch with the group, during which he elaborated on his vision for the city and the challenges that lie ahead. Mayor Masiello was pleased by ENrG Inc.'s presence in Buffalo , thanking the company for its investment in the city and stating that ENrG Inc. is “proof-positive that Buffalo is moving in the right direction."

Aug 1, 2003
Business First Article
Business First article by Joe Iannarelli, “Fuel cell technology gets boost from the state”, discusses ENrG Inc.'s recent NYSERDA awards.

July 18, 2003
Governor George E. Pataki Announcemment

Governor George E. Pataki today announced $14.5 million to support 36 distributed generation and combined heat and power (DG and CHP) projects throughout the State. ENrG Inc. is listed as an awards winner through NYSERDA.

July 1, 2003
ENrG Inc. and Refractron Technologies Corp.

ENrG Inc. is a subcontractor under a $117,000, 12-month contract from Refractron Technologies Corp. to evaluate and aid the commercialization of low cost zirconia powders.

Back to Top

Prototyping
  Contract R&D
  Contract Manufacturing
  Ceramic Liners, Tape, Casting, Patterning
Ceramic Technology for Clean Energy  
Home | About Us | Capabilities | Services | Products | News | Contact Us
ENrG Inc. | 155 Rano Street, Suite 300 | Buffalo, NY 14207 | 716-873-2939 x210 | Fax 716-873-3196 | info@enrg-inc.com ©2010 ENrG Inc. All rights reserved.